Allen & Heath XONE:23 – 2+2 Channel DJ Mixer

  • Xone Filter with Resonance Control
  • 3-Band Total Kill EQ
  • VCA Faders
  • Illuminated Switches
  • Crossfader Curve Selector
  • Balanced XLR Microphone Input
  • 9-Segment Signal Level Monitoring
  • Balanced XLR Master Outputs
  • Dedicated Monitor Output
  • External FX Loop

$300.00 $399.00

The Allen & Heath XONE:23 – 2+2 Channel DJ Mixer is designed for professional and home DJ applications such as at a party or in the club. The mixer features an enhanced version of Allen and Heath’s Xone voltage controlled filter system with resonance control, a 3-band total kill EQ per side, VCA faders, illuminated switches, styling from the flagship DB4 DJ mixer, and a user upgradeable crossfader with curve selector.

For I/O, the mixer includes two pairs of RCA line inputs and two pairs of RCA phono inputs. Though the mixer has two faders, each of the four inputs has an independent level control to enable playing up to four simultaneous sources in the mix. It also features dedicated stereo send and return channels for integrating external effects units. The front panel of the unit includes a balanced XLR input for connecting a microphone with level, high frequency, and low frequency equalizer controls.

The master outputs are on balanced XLR connectors and the mixer includes a dedicated stereo booth output, as well as a dedicated stereo record out for capturing your mixes to a portable recorder. An 1/8″ and a 1/4″ headphone connector enable cueing with a wide variety of DJ headphones.

For control, the front panel of the mixer features gain knobs for all four channels. The four inputs are slit into left and right sides, each with a 9-segment LED light meter, separate high, mid, and low frequency total kill EQ knobs, a VCA channel fader, illuminated cue button, and an illuminated button to engage the filter on that side. The center section includes an illuminated button for engaging the external effects send/return, an illuminated button for engaging a high pass filter, an illuminated button for engaging the low pass filter, a frequency selector knob for the filter, and a VCA resonance control knob from mild to wild.

The crossfader features a switchable curve for mixing or scratching. As an option, the user can replace the stock crossfader with Allen and Heath’s high end Innofader for enhanced performance (sold separately).


Provides voltage controlled low and high pass filters with frequency and resonance control

External FX Loop

Enables send and return connection to external effects processor with the push of a button

Crossfader Curve Selector

Switches curves between modes dedicated to mixing and scratching

Upgradeable Crossfader

Allows for user to purchase and install an Allen and Heath Innofader for enhanced crossfader performance

Input Level Control

Enables simultaneous mixing of all four inputs

Headphone Output

Provides 1/8″ and ¼” jacks for connecting to a variety of DJ headphones

Record Output

Enables recording DJ mixes to external recorders
Categories: ,
Number of Channels 2 x Stereo
Fader Shutoff Channel: >-80 dB
Crossfader: >-80 dB
EQ Channel EQ:
Built-In Effects None
Audio Inputs 2 x Stereo RCA Phono Input
2 x Stereo RCA Line Input
1 x Stereo RCA Return Input
1 x XLR 3-Pin Mic Input
Audio Outputs 2 x XLR 3-Pin Balanced Master Output
1 x Stereo RCA Booth Output
1 x Stereo RCA Record Output
1 x Stereo RCA Send Output
1 x 1/4″ TRS Headphone Output
1 x 1/8″ / 3.5 mm TRS Headphone Output
USB None
Frequency Response 10 Hz to 50 kHz
Input Level Phono:
7 (Min)
100 mV (Max)
-10 dBu (Min)
+20 dBu (Max)
0 dBu (Min)
+20 dBu (Max)
-42 dBu (Min)
-12 dBu (Max)
Output Level Master:
+4 dBu (Nominal)
+28 dBu (Max)
-2 dBu (Nominal)
+22 dBu (Max)
-2 dBu (Nominal)
+19 dBu (Max)
-2 dBu (Nominal)
+19 dBu (Max)
Headphone Output Power 200 mW into 30 Ohms (Max)
I/O Impedance Phono Input:
47 Ohms
Line Input:
20 Kilohms
Return Input:
10 Kilohms
Mic Input:
<2 Kilohms
Master Output:
100 Ohms
Booth Output:
100 Ohms
Record Output:
100 Ohms
Send Output:
100 Ohms
Headphone Output:
1 Ohms
SNR Master:
-85 dBu
THD+N 0.01%
Dimensions (W x D x H) 9.4 x 12.4 x 4.2″ / 240.0 x 315.0 x 106.0 mm
Weight 6 lb / 2.7 kg
Packaging Info
Package Weight 10.9 lb
Box Dimensions (LxWxH) 18.2 x 13.1 x 7.7″

Based on 0 reviews

0.0 overall

Be the first to review “Allen & Heath XONE:23 – 2+2 Channel DJ Mixer”

There are no reviews yet.

Translate »