-22%
,

DJI D-RTK 2 GNSS Mobile Station and Tripod Kit


  • Works with Phantom 4 RTK & MG-1P RTK
  • Centimeter-Level Mapping Precision
  • Accesses GPS, GLONASS, Beidou & GALILEO
  • Tripod Included for Added Stability
  • Tripod Provides up to 5.3′ of Height
  • Connects via 4G, OcuSync, Wi-Fi & LAN
  • Connect up to 5 Remote Controllers
  • Carbon Fiber Body
  • IP67-Rated Water & Dust Resistance
  • Built-In IMUs Monitor Movement

$4,299.00 $5,500.00

When using your Phantom 4 RTK or MG-1P RTK drone to map or survey a jobsite, you can help your accuracy with the DJI D-RTK 2 GNSS Mobile Station and Tripod Kit. This kit is designed to augment your drone’s mapping accuracy by giving you a strong and stable GNSS network signal. With a steady signal your RTK drone can achieve centimeter-level mapping accuracy. Simply place the mobile station on the site where you get the best signal. The mobile station supports access to GPS, GLONASS, Beidou, and GALILEO GNSS networks.

Accessing the mobile station itself can be done via a variety of controller connection types such as 4G, OcuSync, Wi-Fi, and LAN. The mobile station also features IP67-level weather protection so it can be left outside in inclement weather. A tripod is included in this kit to help the D-RTK 2 maintain a steady signal in such conditions. It’s specifically designed to work with the mobile station and features spiked feet for added support and stability.

DJI D-RTK 2 GNSS Mobile Station for Phantom 4 RTK Drones

Accuracy is key when drone mapping in industries such as construction, surveying, inspection, and real estate. The D-RTK 2 GNSS Mobile Station for Phantom 4 RTK Drones from DJI is designed to allow Phantom 4 RTK or MG-1P RTK drones the ability to access GNSS signals for centimeter-level mapping accuracy. The mobile station’s high-gain antenna is capable of accessing all four of the major GNSS satellite constellations: GPS, GLONASS, Beidou, and GALILEO.

Flight Control System

Additional Features

Connect controllers via 4G, OcuSync, Wi-Fi, or LAN
Connect up to 5 controllers for multi-drone operations
Supports Phantom 4 RTK and MG-1P controllers
Carbon fiber body and IP67-level weather protection
Built-in IMUs monitor movement and alerts operators of abnormalities
Can also be used as a CORS (Continuously Operating Reference Station)

DJI D-RTK 2 Mobile Station Tripod

The D-RTK 2 Mobile Station Tripod from DJI works in conjunction with the DJI D-RTK 2 Mobile Station to help provide a stable platform for obtaining a GNSS connection. It’s an essential accessory for the D-RTK 2 when attempting to achieve centimeter-level accuracy for drone-based surveying and mapping projects. The tripod is designed to affix securely to the ground utilizing spikes on the ends of each of the three legs. The 3.3′ height and up to 23.6″ leg extension help to achieve a solid GNSS connection for the D-RTK 2.

  • Extension Rod
  • Mobile Phone Holder
  • Charging Hub
  • 2 x DJI LiPo Battery Pack for DJI CrystalSky & Cendence (7.6V, 4920mAh)
  • Battery Cover
  • AC Power Adapter
  • AC Power Cable
  • MG Power Cable
  • LAN Cable
  • USB Type-C Cable
  • USB Type-C OTG Cable
  • Hex Key
  • Battery Strap
  • Carabiner
  • MG-12000P XT90 Shorting Plug
  • 1-Year Warranty (Body and Charging Hub)
  • 6-Month Warranty (Battery, AC Power Adapter, and Power Adapter II)
  • DJI D-RTK 2 Mobile Station Tripod
  • 3-Month Warranty
Receiver
GNSS Simultaneously receive

GPS: L1 C/A, L2, L5
Beidou: B1, B2, B3
GLONASS: F1, F2
GALILEO: E1, E5A, E5B

Positioning Accuracy Single Point

Horizontal: 4.9′ / 1.5 m (RMS)
Vertical: 9.8′ / 3.0 m (RMS)

RTK

Horizontal: 0.4″ / 1 cm+ 1 ppm (RMS)
Vertical: 0.8″ / 2 cm+ 1 ppm (RMS)
1 ppm: For every 0.62 mi / 1 km increase in distance, the accuracy will be 0.04″ / 1 mm less. For example, the horizontal accuracy is 0.43″ / 1.1 cm when the receiving end is 0.62 mi / 1 km away from the base station.

Positioning Update Rate: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Cold Start < 45 seconds
Hot Start < 10 seconds
Differential Data Format: RTCM 2.x/3.x
Communications
Data Link Protocol OcuSync, Wi-Fi, LAN, and 4G
Operating Frequencies 2.4 GHz: 2.400 to 2.483 GHz (China, United States, Australia, Europe, Japan, Korea)
5.8 GHz: 5.725 to 5.850 GHz (China, United States, Australia)
EIRP OcuSync

2.4 GHz SRRC (Mainland China) / CE (Europe) / MIC (Japan) / KCC (Korea): < 20 dBm
2.4 GHz FCC (United States, Australia) / NCC (Taiwan, China): < 26 dBm 5.8 GHz FCC (United States, Australia) / SRRC (Mainland China) / NCC (Taiwan, China): < 26 dBm

Wi-Fi

2.4 GHz SRRC (Mainland China) / CE (Europe) / MIC (Japan) / KCC (Korea): < 20 dBm
2.4 GHz FCC (United States, Australia) / NCC (Taiwan, China): < 22 dBm
5.8 GHz FCC (United States, Australia) / SRRC (Mainland China) / NCC (Taiwan, China): < 22 dBm

Communication Distance OcuSync: 1.2 mi / 2 km (unobstructed and free of interference when the distance from the D-RTK 2 antenna to the ground is 5.9′ / 1.8 m, when the difference in height between the remote controller and D-RTK 2 is < 6.6′ / 2 m, and when the remote controller is 3.9′ / 1.2 m from ground level)
Memory Capacity 16 GB
Electrical Characteristics
Power Consumption 12 W
Power Supply 16.5 to 58.8 VDC
Battery Type Lithium-ion
Battery Capacity 4920 mAh
Battery Energy 37.3 Wh
Run Time WB37 Battery: > 2 hours
MG-12000P Battery: > 50 hours
General
Operating Temperature 32 to 113°F / 0 to 45°C
Dimensions D-RTK 2 Body with Extension Rod: 2.7 x 6.6 x 67.2″ / 6.8 x 16.8 x 170.8 cm
IP Rating IP67
Packaging Info
Package Weight 12.15 lb
Box Dimensions (LxWxH) 55 x 9 x 8″

DJI D-RTK 2 Mobile Station Tripod Specs

General
Compatibility DJI D-RTK 2 Mobile Station
Tripod Height 3.3′ / 1.0 m
Leg Extension 23.6″ / 60.0 cm
Dimensions 5.1 x 39.4″ / 13.0 x 100.0 cm
Weight 5.2 lb / 2.4 kg
Packaging Info
Package Weight 7.25 lb
Box Dimensions (LxWxH) 41 x 8 x 8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DJI D-RTK 2 GNSS Mobile Station and Tripod Kit”

There are no reviews yet.

Translate »