This DJI Mavic 3 Drone Kit with Battery, Light, Landing Pad & Nanuk 925 Case for Mavic 3 is assembled to provide you with DJI’s flagship drone, the Mavic 3, a second battery, a strobe light to help avoid collisions, a landing pad, and a black Nanuk hard case with custom cut foam. The Mavic 3 has a dual-camera setup in a 3-axis gimbal. It features a 20MP camera with a wide-angle lens, as well as a 1/2″ 12MP CMOS sensor with a 28x hybrid zoom lens for 4K video. The included case features a custom-cut foam interior that carries the Mavic 3 and a variety of accessories, so you are ready to go when you get to your flight location.
The included intelligent flight battery matches the one that comes with your Mavic 3, so you can quickly swap out a drained battery for a fresh one and keep flying. The strobe mounts on your drone, allowing you to satisfy FAA guidelines for night flying, while the pad helps protect your drone from debris when taking off and landing. The impact-resistant resin case protects your equipment and is waterproof, with an IP67 rating to keep your gear safe, dry, and protected from dust.
DJI Mavic 3
A leap forward in professional-quality aerial imaging, the Mavic 3 from DJI is their flagship drone that offers a dual-camera setup in a 3-axis gimbal. There’s the 20MP wide-angle camera with 4/3″ CMOS from legendary camera maker Hasselblad and a 12MP telephoto with 1/2″ CMOS, 4K video, and 28x hybrid zoom. You can utilize the telephoto in Explore Mode to scout locations, but its primary function is to be used in conjunction with the wide-angle Hasselblad, transitioning between the two for truly dynamic, cinematic results.
The video quality of the wide-angle Hasselblad on the Mavic 3 offers up to 5.1K resolution and DCI 4K at 120 fps. The 12.8 stops of dynamic range and an adjustable aperture from f/2.8 to f/11 open up the drone’s ability to handle nearly any lighting condition and deliver low-light footage with less noise. Add in vision sensor-based VDAF focusing and an 84° FOV, and you can capture sweeping, atmospheric shots or track and focus on subjects with ease. To complete the Mavic 3’s powerful imaging abilities, 10-bit D-Log Color Profile and Hasselblad’s NCS (Natural Color Solution) are employed for natural and accurate color reproduction.
To support these exceptional imaging capabilities and the pilots who will capture them, DJI packed the Mavic 3 with technologies to get the most out of each shoot. Multiple features allow you to create flight paths, auto-track subjects, and perform complex aerial maneuvers with a tap. While doing all of this, an omnidirectional obstacle sensing system and APAS 5.0 work to ensure a collision-free flight. Add in up to 46 minutes of flight time, a transmission range of up to 9.3 miles, and a folding design, and you have a powerful platform that’s ideal for everything from tech-obsessed amateur photographers to professional production houses.
Hasselblad Natural Color Solution
Extreme Precision Positioning
Still Photo Modes: Single shot, automatic exposure bracketing, and timed photos (up to 60 seconds)
RC-N1 remote controller included (supports up to OcuSync 2.0)
Support for OcuSync 3+ video transmission
Level 5 wind resistance (up to 26.8 mph)
8GB of internal storage capacity
microSD card slot supports up to 2TB cards
Up to 47 mph flight speed
DJI Intelligent Flight Battery for Mavic 3
Film longer by using this official Intelligent Flight Battery for Mavic 3 from DJI. This LiPo battery has a capacity of 5000mAh, which equates to up to 46 minutes of flight time or to 40 minutes of hovering when used with the Mavic 3. Please note that it is recommended by DJI to only recharge this battery with compatible DJI chargers.
Nanuk 925 Waterproof Hard Case for Mavic 3 (Black)
Protect, transport, and store your Mavic 3 with this Nanuk 925 Waterproof Hard Case for Mavic 3. This black case has a custom-cut foam insert designed to fit the DJI Mavic 3. The case is waterproof and made of impact-resistant resin. It features Nanuk’s PowerClaw latching system and is padlockable for security. For efficient storage and transport, the case is securely stackable with additional units.
- Fits the DJI Mavic 3
- PowerClaw latching system
- IP67 waterproof rating
- Impact-resistant NK-7 resin construction
- Handle stay
- Lid stay
- Stainless steel hardware
Lume Cube STROBE Anti-Collision Light for Drones
Satisfy FAA guidelines by adding anti-collision strobe lighting to your drone so you can fly at night with this STROBE Anti-Collision Light from Lume Cube. Each STROBE light includes a 3M dual-lock mount and a micro-USB charging cable, and it is compatible with any drone.
Each light weighs less than an ounce, so it won’t add much weight to your drone setup. For different patterns, it allows you to configure it to fast strobe, slow strobe, or constant light, and it can be seen 360° from over three miles away. A micro-USB cable is included to charge the built-in battery which takes less than 60 minutes, and it lasts approximately two hours when running on the fast strobe setting. One red and one green cap are included to pop onto the top of the light and change the STROBE color from its default white.
PGYTECH Landing Pad for Drones (43.3″)
Treat your beloved drones to a 43.3″ Landing Pad from PGYTECH. Portable and easy to fold, this double-sided pad protects your drone’s gimbal and camera during takeoff and landing. The landing pad comes with three pegs for securing it to the ground so it doesn’t get blown away by the wind while you’re up in the sky. Also included are eight reflective stripes to make landing easier in low-light situations. At the end of the day, just twist-fold the pad, slip it into the included zippered nylon pouch, and you’re good to go.
Lexar 128GB Professional 1066x UHS-I microSDXC Memory Card with SD Adapter (SILVER Series)
Designed for action cameras, drones, and Android smartphones, the 128GB Professional 1066x UHS-I microSDXC Memory Card from Lexar features a storage capacity of 128GB and supports maximum read speeds of up to 160 MB/s and maximum write speeds of up to 120 MB/s. This card has also been designed with the V30 Video Speed Class rating, which guarantees minimum write speeds of at least 30 MB/s. All of this provides the speed and storage you need to capture more adventures on the go.
Aside from support for UHS-I, V30, and U3, Lexar also built this card with support for the Application Performance Class 2 (A2) spec, which includes optimizations to give Android users an improved mobile experience, delivering faster mobile app performance. The A2 spec allows the card to manage random read input-output access per second (IOPS) operations so it can quickly open apps and process accompanying tasks, such as audio, graphics, saved profiles, and in-app permissions.
To help increase durability, Lexar designed this card to be resistant to water, shock, vibration, x-rays, and temperature extremes. Included is a microSD to SD adapter, allowing this card to be used in SD-compatible devices.
Quick Transfer Content
Capture the Action
Load Apps Quicker with A2 Speeds
Designed for Durability
- RC-N1 Remote Controller
- Intelligent Flight Battery
- 3 x Pair of Low-Noise Propellers
- 65W Portable Charger
- Storage Cover
- RC-N1 Remote Controller Sticks
- RC-N1 Remote Controller USB Type-C Cable
- RC-N1 Remote Controller Micro-USB Cable
- RC-N1 Remote Controller Lightning Cable
- USB Type-C Cable
- 1-Year Warranty on Main Controller, Gimbal/Camera, Vision Positioning System, Propulsion System (Excluding Propellers), Remote Controller, Battery (with Less Than 200 Charge Cycles), and Charger
- DJI Intelligent Flight Battery for Mavic 3
- 1-Year Warranty (with Less than 200 Charge Cycles)
- Nanuk 925 Waterproof Hard Case for Mavic 3 (Black)
- Lifetime Warranty
- Lume Cube STROBE Anti-Collision Light for Drones
- 3M Dual Lock Mount
- Micro-USB Charging Cable
- Red Cap
- Green Cap
- 1-Year Warranty
- PGYTECH Landing Pad for Drones (43.3″)
- 3 x Ground Pegs
- 8 x Fluorescent Stripes
- Zippered Pouch
- Lexar 128GB Professional 1066x UHS-I microSDXC Memory Card with SD Adapter (SILVER Series)