This Mavic 3 Fly More Combo with STROBE Light & 128GB microSD Kit includes a Mavic 3 drone with Fly More accessory bundle, a Lume Cube STROBE light, a 128GB microSD card, and a large 43.3″ double-sided landing pad. This kit is designed to give new pilots the gear they need to fly longer, capture more, and do it safely—even at night. Night flying is possible with the LED STROBE that can be used as a continuous light source, or you can use it primarily for increased safety as a strobing anti-collision light.
Whether you’re in the air during the day or night, the Mavic 3 can deliver impressive video at up to 4K resolution, and dynamic stills with its dual 20MP wide-angle and 12MP telephoto camera system. Thanks to the Fly More accessories and this kit’s included 128GB of memory, you get extra batteries to film longer and more storage space for the resulting images and video. Since you’ll be flying more often, the addition of a large 43.3″ landing pad can help reduce possible damage to the drone’s camera during takeoff and landing, by covering debris that could kick up and strike the drone.
DJI Mavic 3 Fly More Combo
Fly longer when on location with the Mavic 3 Fly More Combo from DJI. The combo adds additional accessories, such as extra batteries, propellers, a charging hub, and more, all geared to keep you in the air for as long as possible with your Mavic 3, DJI’s flagship drone that’s a leap forward in professional-quality aerial imaging. The drone offers a dual-camera setup in the 3-axis gimbal. A 20MP wide-angle camera with 4/3″ CMOS from legendary camera maker Hasselblad and a 12MP telephoto with 1/2″ CMOS, 4K video, and 28x hybrid zoom. You can utilize the telephoto in Explore Mode to scout locations or in conjunction with the wide-angle Hasselblad, transitioning between the two for truly dynamic, cinematic results.
The video quality of the wide-angle Hasselblad on the Mavic 3 offers up to 5.1K resolution and DCI 4K at 120 fps. The 12.8 stops of dynamic range and an adjustable aperture from f/2.8 to f/11 open up the drone’s ability to handle nearly any lighting condition and deliver low-light footage with less noise. Add in vision sensor-based VDAF focusing and an 84° FOV, and you can capture sweeping, atmospheric shots or track and focus on subjects with ease. To complete the Mavic 3’s powerful imaging abilities, 10-bit D-Log Color Profile and Hasselblad’s NCS (Natural Color Solution) are employed for natural and accurate color reproduction.
To support these exceptional imaging capabilities and the pilots who will capture them, DJI packed the Mavic 3 with technologies to get the most out of each shoot. Multiple features allow you to create flight paths, auto-track subjects, and perform complex aerial maneuvers with a tap. While doing all of this, an omnidirectional obstacle sensing system and APAS 5.0 work to ensure a collision-free flight. Add in up to 46 minutes of flight time, a transmission range of up to 9.3 miles, and a folding design, and you have a powerful platform that’s ideal for everything from tech-obsessed amateur photographers to professional production houses.
Hasselblad Natural Color Solution
Extreme Precision Positioning
Still Photo Modes: Single shot, automatic exposure bracketing, and timed photos (up to 60 seconds)
RC-N1 remote controller included (supports up to OcuSync 2.0)
Support for OcuSync 3+ video transmission
Level 5 wind resistance (up to 26.8 mph)
8GB of internal storage capacity
microSD card slot supports up to 2TB cards
Up to 47 mph flight speed
Lume Cube STROBE Anti-Collision Light for Drones
Satisfy FAA guidelines by adding anti-collision strobe lighting to your drone so you can fly at night with this STROBE Anti-Collision Light from Lume Cube. Each STROBE light includes a 3M dual-lock mount and a micro-USB charging cable, and it is compatible with any drone.
Each light weighs less than an ounce, so it won’t add much weight to your drone setup. For different patterns, it allows you to configure it to fast strobe, slow strobe, or constant light, and it can be seen 360° from over three miles away. A micro-USB cable is included to charge the built-in battery which takes less than 60 minutes, and it lasts approximately two hours when running on the fast strobe setting. One red and one green cap are included to pop onto the top of the light and change the STROBE color from its default white.
SanDisk 128GB Extreme UHS-I microSDXC Memory Card with SD Adapter
Designed for microSD devices such as smartphones, interchangeable-lens cameras, drones, or GoPro action cameras that can capture Full HD, 3D, and 4K video, as well as raw and burst photography, the 128GB Extreme UHS-I microSDXC Memory Card from SanDisk has a capacity of 128GB, is compatible with the UHS-I bus, and features a speed class rating of V30, which guarantees minimum write speeds of 30 MB/s. If your device does not support the V30 standard, this card also supports the U3 standard, which also guarantees minimum write speeds of 30 MB/s. Read speeds are supported up to 160 MB/s and write speeds max out at 90 MB/s.
While this card has been designed for cameras that are UHS-I / V30 / U3 compatible, it may be used in devices that do not support UHS-I / V30 / U3. However, bear in mind that this card will then default to your device’s speed class and bus rating, such as UHS-I and U1, which supports minimum write speeds of 10 MB/s, or Class 10, which also supports minimum write speeds of 10 MB/s.
Aside from support for UHS-I, V30, and U3, SanDisk also built this card with support for the Application Performance Class 2 (A2) spec, which includes optimizations to give Android users an improved mobile experience, delivering faster mobile app performance. The A2 spec allows the card to manage random read input-output access per second (IOPS) operations so it can quickly open apps and process accompanying tasks, such as audio, graphics, saved profiles, and in-app permissions.
As with most SanDisk media, this memory card is shockproof, X-ray proof, and waterproof, while also being able to withstand temperatures, allowing you to take this card with you into extreme environments. Should the card’s data become compromised, you also benefit from the option to download RescuePRO Deluxe software, and SanDisk’s Memory Zone app offers users a simple way to organize, browse, and back up files on their Android mobile device. Additionally, included is a microSD to SD adapter with a write protect switch, allowing this card to be used in SD-compatible devices.
PGYTECH Landing Pad for Drones (43.3″)
Treat your beloved drones to a 43.3″ Landing Pad from PGYTECH. Portable and easy to fold, this double-sided pad protects your drone’s gimbal and camera during takeoff and landing. The landing pad comes with three pegs for securing it to the ground so it doesn’t get blown away by the wind while you’re up in the sky. Also included are eight reflective stripes to make landing easier in low-light situations. At the end of the day, just twist-fold the pad, slip it into the included zippered nylon pouch, and you’re good to go.
- RC-N1 Remote Controller
- 3 x Intelligent Flight Battery
- ND Filter Set (ND4, ND8, ND16 & ND32)
- 6 x Pair of Low-Noise Propellers
- 65W Portable Charger
- Battery Charging Hub
- Storage Cover
- RC-N1 Remote Controller Sticks
- RC-N1 Remote Controller USB Type-C Cable
- RC-N1 Remote Controller Micro-USB Cable
- RC-N1 Remote Controller Lightning Cable
- USB Type-C Cable
- Convertible Carrying Bag
- 1-Year Warranty on Main Controller, Gimbal/Camera, Vision Positioning System, Propulsion System (Excluding Propellers), Remote Controller, Battery (with Less Than 200 Charge Cycles), Charger, and Battery Charging Hub
- Lume Cube STROBE Anti-Collision Light for Drones
- 3M Dual Lock Mount
- Micro-USB Charging Cable
- Red Cap
- Green Cap
- 1-Year Warranty
- SanDisk 128GB Extreme UHS-I microSDXC Memory Card with SD Adapter
- microSD to SD Adapter
- Lifetime Warranty
- PGYTECH Landing Pad for Drones (43.3″)
- 3 x Ground Pegs
- 8 x Fluorescent Stripes
- Zippered Pouch