-25%
,

Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish)


  • 74 Hz to 20 kHz Frequency Response
  • 3/4″ Metal Dome Tweeter for Treble
  • 3″ Woofer for Bass
  • Bass Tilt Control
  • Aluminum Minimum Diffraction Enclosure
  • Directivity Control Waveguide
  • Active Crossover and Protection Filters
  • 25W of Class-D Amplification per Driver
  • Intelligent Signal Sensing Circuitry
  • Balanced XLR Input

$300.00 $399.00

Styled in what the manufacturer has dubbed “Producer Finish,” the Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3″ woofer and a 3/4″ metal dome tweeter housed in a die-cast aluminum enclosure.

The monitor utilizes Genelec’s Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.

The amplifiers utilize Genelec’s Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly.

A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.

Categories: ,
Type Active
Drivers 1 x 0.8″ / 1.9 cm Tweeter
1 x 3″ / 7.6 cm Woofer
Amplifier Output Bass with 8-Ohm Load: 25 W
Treble with 8-Ohm Load: 25 W
Maximum SPL Short Term at 1 m: ≥96 dB
Short Term at 0.5 m: ≥102 dB
Long Term at 1 m: ≥91 dB
Peak at 1 m: ≥105 dB
Filter Lower Cut-Off Frequency, -3 dB: ≤73 Hz
Upper Cut-Off Frequency, -3 dB: ≥21 kHz
Frequency Response 74 Hz to 20 kHz (±2.5 dB)
67 Hz to 25 kHz (-6 dB)
Harmonic Distortion 70 to 400 Hz: <3% (80 dB SPL, 1 m, On Axis)
Above 400 Hz: <0.5% (80 dB SPL, 1 m, On Axis)
Input 1 x Balanced 3-Pin XLR Female
Input Impedance 10 kOhms
Input Level For 100 dB SPL Output at 1 m: -6 dBu (Sensitivity -10 dB Off)
Level Control Range Relative to Max Output: -10 dB (Sensitivity -10 dB On)
Crossover Frequency Bass/Treble: 3 kHz
Tilt Bass Control in -2 dB Steps: 0 to -6 dB at 100 Hz
THD + N ≤0.08%
Voltage 100 to 240 VAC
Operating Range Voltage: ± 10%
Power Consumption Standby: <0.5 W
Idle: 5 W
Full Output: 30 W
Dimensions With ISO Stand: 7.7 x 4.8 x 4.5″ / 19.5 x 12.1 x 11.5 cm
Without ISO Stand: 7.1 x 4.8 x 4.5″ / 18.1 x 12.1 x 11.5 cm
Weight 3.3 lb / 1.5 kg
Packaging Info
Package Weight 4.4 lb
Box Dimensions (LxWxH) 12.3 x 6.6 x 6″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish)”

There are no reviews yet.

Translate »