MOBOTIX M16 Outdoor Network Thermographic Camera with T237 Thermal Lens

336 x 252 Thermal Resolution
T237 Thermal Lens
7.5 to 13.5µm IR Sensitivity Range
17° Horizontal Field of View

$3,100.00 $4,799.00

The M16 Outdoor Network Thermographic Camera with T237 Thermal Lens from MOBOTIX is equipped with an uncooled microbolometer image sensor to capture 336 x 252 resolution video. The T237 thermal lens provides a 17° horizontal field of view and a 7.5 to 13.5µm IR sensitivity range. A built-in microphone and speaker make two-way audio communication possible. Recorded footage is stored on an internal 4GB microSD card. Integrated PoE technology simplifies connectivity by transferring data and power over one cable.

Video management for this device is possible thanks to the MxManagementCenter VMS for Windows & Mac PCs, and the MOBOTIX app for iOS devices. This camera is IP66-rated for outdoor use.

Dual lens system enables you to add an optional 6MP optical sensor module (available separately) to the factory-assembled thermal sensor
Temperature measurement of 2 x 2 pixels in the center of an image (thermal spot)
MxPEG, MJPEG, and H.264 simultaneous triple streaming
Intelligent 3D motion detection in complete darkness
PIR sensor
Temperature sensor
Digital zoom and pan
Genetec protocol integration
Snapshot recording (pre/post-alarm images)
Continuous recording with audio
Time controlled flexible event logic
Weekly schedules for recordings and actions
Event video and image transfer via FTP and email
Playback and QuadView via web browser
Bidirectional audio in browser
Animated logos on the image
Master/slave communication
Privacy zone scheduling
Customized voice messages
VoIP telephony (audio/video, alert)
Remote alarm notification (network message)
Programming interface (HTTP-API)
MxMessageSystem for sending and receiving MxMessages
Video analysis includes video motion detector and MxActivitySensor
Event trigger for temperatures above or below a limit between -40 to 1022°F
MxManagementCenter VMS for Windows & Mac PCs
MOBOTIX mobile app compatible with iOS 6.0 and above
2 x I/O and RS-232 interfaces via optional accessories available separately
Wall, pole, or ceiling mountable
Wall and ceiling mount included

In the Box
MOBOTIX M16 Outdoor Network Thermographic Camera with T237 Thermal Lens
Mounting Hardware
2 x Allen Wrenches
Module Key
VarioFlex Wall and Ceiling Mount with Rubber Sealing
1.64′ Ethernet Patch Cable
Blind Module
4GB microSD Card (Installed)
1-Year Warranty


Image Sensor Thermal, uncooled microbolometer
Thermal Resolution 336 x 252
Horizontal Field of View (degree) 17°
Vertical Field of View (degree) 13°
IR Sensitivity Range 7.5 to 13.5 µm
Thermal Sensitivity (NETD) 50 mK, <79 mK
Thermal Image Representation False colors or B&W
Temperature Measuring Range High Sensitivity: -40 to 320°F / -40 to 160°C
Low Sensitivity: -40 to 1022°F / -40 to 550°C
Measuring Methods Temperature measurement via camera in the center of the image, 2 x 2 pixels
Temperature Accuracy ±-4°F / ±-20°C
Microprocessor i.MX 6 Dual Core including GPU (1 GB RAM, 512 MB flash)
Built-In Microphone Yes
Built-In Speaker Yes
Wideband Audio 16-bit / 16 kHz wideband audio (Opus codec) for live and audio messages
PIR Sensor Yes
Temperature Sensor Yes
Tamper Detection With future software update
Video Codecs MxPEG, MJPEG, H.264
Bandwidth limitation available, output image format up to QXGA for H.264
Streaming Capability Triple streaming
Multicast stream via RTSP
Maximum Resolution Dual Sensors: 2x 6 MP / 6144 x 2048
Frame Rates 9 fps maximum for thermal images, thermal overlay, and dual images (thermal & optical)

MxPEG: 6 fps at 2x 6 MP / 6144 x 2048, 12 fps at 3072 x 2048, 15 fps at 2592 x 1944, 24 fps at 2048 x 1536, 34 fps at 1920 x 1080, 42 fps at 1280 x 720

MJPEG: 2 fps at 2x 6 MP / 6144 x 2048, 4 fps at 3072 x 2048, 5 fps at 2592 x 1944, 9 fps at 2048 x 1536, 13 fps at 1920 x 1080, 26 fps at 1280 x 720

H.264: 20 fps at 2048 x 1536, 25 fps at 1920 x 1080

Storage Internal 4 GB microSD card (included), externally via USB device and NAS, different streams for live image and recording, MxFFS with archive function, pre-alarm an post-alarm images, monitoring recording with failure reporting
Number of Images Number of Images Using 4 GB microSD Card:
CIF: 250,000
VGA: 125,000
HD: 40,000
QXGA: 20,000
6 MP: 10,000
Security User and group management, SSL connections, IP-based access control, IEEE 802.1x, intrusion detection, digital image signature
Protocols IPv4, IPv6, HTTP, HTTPS, FTP, SFTP, RTP, RTSP, UDP, SNMP, SMTP, DHCP (client and server), NTP (client and server), SIP (client and server), G.711 (PCMA and PCMU), and G.722
Power Consumption Single Thermal Operation (1x Thermal):
5.5 W typical

Mixed Operation (1x Thermal, 1x Optical):
6.5 W typical

PoE Class IEEE 802.3af class 2 or 3 (variable)
Factory setting, class 3 (required for thermal operation)
Interfaces Ethernet (MxRJ45), USB
RS-232 with MX-232-IO-Box accessory available separately
Mounting Options Wall, pole, or ceiling (wall and ceiling mount included)
Mean Time Between Failures (MTBF) >80,000 hours
IP Rating IP66
IK Rating IK06 with 2nd 6 MP sensor module
Certifications EN55032:2012, EN55022:2010, EN55024:2010, EN61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-3:2007+A1:2011, EN61000-6-4:2007+A1:2011, AS/NZS CISPR22:2009+A1:2010, CFR 47 FCC Part 15 B
Housing Material: PBT-30GF
Color: White
Dimensions (H x W x D) 8.3 x 6.2 x 8.1″ / 210 x 158 x 207 mm
Weight 3 lb / 1320 g

Based on 0 reviews

0.0 overall

Be the first to review “MOBOTIX M16 Outdoor Network Thermographic Camera with T237 Thermal Lens”

There are no reviews yet.

Translate »