-25%
,

PreSonus Eris 2.1 Monitor Kit with 2 Studio Monitors and Subwoofer


  • Two Eris E5 2-Way Active Studio Monitors
  • 5.25″ Kevlar Woofer and 1″ Tweeter
  • Monitors: 160W Class-AB Biamplification
  • 102 dB Max SPL
  • Eris Sub8 Compact Powered Subwoofer
  • 8″ Front-Firing Composite Woofe
  • 30 to 200 Hz Frequency Response
  • 113 dB Maximum Peak SPL
  • Sub: 100W of Class-AB Amplification
  • Includes Studio One Prime + Studio Magic

$300.00 $399.00

Audio engineers, music producers, and musicians in search of a great sounding, cost effective monitoring system will be thrilled by this Kit, which combines two PreSonus Eris E5 Two-Way Active 5.25″ Studio Monitors with the Presonus Eris Sub8 Compact Powered Studio Subwoofer.

PreSonus Eris E5 Two-Way Active 5.25″ Studio Monitor (Single)

The Eris E5 Two-Way Active 5.25″ Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low-frequency transducers, low-mass silk-dome tweeters and responsive Class-AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

The E5 begins with a front-ported enclosure made of vinyl-laminated MDF. It features a 5.25″ Kevlar low-frequency driver mated with a 45W, Class-AB amplifier. For the highs, Eris employs a 1″ silk-dome tweeter powered by a 35W, Class-AB amplifier. The E5 outputs a clean 102 dB peak SPL. Its frequency response is rated at 64 Hz to 22 kHz.

The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Once you’re plugged in, set the Input Gain and you’re ready to go.

Acoustic Tuning Controls

The Eris provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors to your space. The Low control also is useful when using the E5 with a subwoofer.

The High control is a shelving filter that boosts or cuts all frequencies above 4.5 kHz by as much as 6 dB. The Mid control is a mid-frequency peak filter that boosts or cuts frequencies centered at 1 kHz and extending about one octave above and below that frequency. The Low Cutoff control rolls off frequencies below either 80 or 100 Hz at a slope of 12 dB/octave. This control is especially useful if you also have a connected subwoofer.

Acoustic Space Control

A three-position Acoustic Space switch controls a second-order, low shelving filter that cuts frequencies below 800 Hz by either 2 or 4 dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.

Thorough Protection Circuitry

RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. Soft-startup amplifiers prevent damaging pops from sounding through the speakers when you power them up.

Supplied Software

Studio One Prime DAW software and Studio Magic plug-in suite are included

PreSonus Eris Sub8 Compact Powered Studio Subwoofer

The PreSonus Eris Sub8 is a compact, powered studio subwoofer designed to work with any set of studio monitors, especially the PreSonus Eris E3.5 or E4.5 full-range studio monitors.

A 100W Class-AB amplifier powers the front-firing 8″ paper-composite woofer, which offers a frequency response of 200 Hz down to 30 Hz with a respectable 113 dB peak SPL. The rear panel features a pair of 1/4″ and RCA inputs as well as 1/4″ and RCA thru/outputs. A variable input gain knob (-30 to +6 dB) and a continuously variable lowpass filter (50 to 130 Hz) helps you dial in the volume and low-frequency sweet spot. Additionally, a defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 output to the main speakers.

Other notable features include a polarity-invert switch and protection circuits for RF interference, output-current limiting, over-temperature, turn on/off transient, subsonic filter, and an external mains fuse. The Eris Sub8 ships with a power cord.

8″ front-firing, paper-composite, low-frequency transducer with high-elasticity rubber surround
Class-AB amplifier: 100W peak (50W RMS) power
Input gain control (-30 dB to +6 dB, continuously variable)
Continuously variable lowpass filter (50 to 130 Hz)
Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
Left and right balanced 1/4″ TRS and unbalanced RCA main inputs
Left and right balanced 1/4″ TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
Polarity invert switch
Protection: RF interference, output-current limiting, over-temperature, turn on/off transient, subsonic filter, external mains fuse
Includes Studio One Prime DAW software and Studio Magic plug-in suite
  • Power Cable
  • Studio One Prime DAW Software
  • Studio Magic Plug-In Suite
  • 1-Year Warranty
  • PreSonus Eris Sub8 Compact Powered Studio Subwoofer
  • Power Cord
  • Studio One Prime Software
  • Studio Magic Plug-In Suite
  • 1-Year Warranty
Categories: ,
Inputs 1 x XLR balanced
1 x 1/4″ TRS balanced
1 x RCA phono unbalanced
Frequency Response 53 Hz to 22 kHz
Crossover Frequency 3 kHz
LF Amplifier 45W
HF Amplifier 35W
Maximum SPL 102 dB @ 1 meter
Low Frequency Driver 5.25″ (13.34 cm) Kevlar
High Frequency Driver 1″ (2.54 cm) silk dome
Input Impedance 10kΩ
Volume Control A-type taper
Equalization HF Control: -6, 0, +6 dB; continuously variable
MF Control: -6, 0, +6 dB; continuously variable
Low Cut Filter: Flat, 80 Hz, 100 Hz; switchable
Acoustic Space Control: Flat, -2 dB, -4 dB; switchable
Protection RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
Enclosure Material Vinyl-laminated MDF
Power Requirements 100 to 120V or 220 to 240V, 50/60 Hz
Dimensions 7 x 7.68 x 10.24″ (178 x 195 x 260 mm)
Weight 10.2 lb (4.63 kg)
Packaging Info
Package Weight 11.8 lb
Box Dimensions (LxWxH) 13.1 x 11.6 x 9.9″

PreSonus Eris Sub8 Compact Powered Studio Subwoofer Specs

Studio Monitor
Monitor Type Active Subwoofer
Enclosure Bass-Reflex, Shielded
Power Rating 100 W Peak
50 W RMS
Drivers 1 x 8″ / 20.3 cm Composite Woofer
Amplification 1 x Subwoofer: Class-AB Rated at 50 W RMS / 100 W Peak
Performance
Frequency Response 30 Hz to 200 Hz
Maximum Sound Pressure Level (SPL) 113 dB
Signal-to-Noise Ratio 95 dBA
Total Harmonic Distortion (THD) 0.05%
Maximum Input Level +6 dB
Phase Adjustment Phase Inversion 0 / 180°
Protections and Limiting Driver Protection, Fuse, Output Current Limiting, Subsonic Filter, Thermal Limiting
Signal Processing
EQ None
Filters Low-Pass at50 Hz
High-Pass at80 Hz
Connectivity
Audio I/O 2 x 1/4″ TRS Balanced Female Analog Input
2 x RCA Unbalanced Female Analog Input
2 x 1/4″ TRS Balanced Female Analog Output/Thru
2 x RCA Unbalanced Female Analog Output/Thru
Power
AC Input Power 100 to 120 VAC, 50/60 Hz
220 to 240 VAC, 50/60 Hz
Power Consumption 100 W
General
Enclosure Material MDF
Dimensions (W x H x D) 9.8 x 11.6 x 12.8″ / 24.9 x 29.5 x 32.5 cm
Weight 16.3 lb / 7.4 kg
Packaging Info
Package Weight 19.085 lb
Box Dimensions (LxWxH) 16.6 x 15.7 x 13.1″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PreSonus Eris 2.1 Monitor Kit with 2 Studio Monitors and Subwoofer”

There are no reviews yet.

You may also like…

Translate »