-33%
,

PreSonus Eris E5 Two-Way Active 5.25 Studio Monitor Pair Kit


  • Pair of Eris E5 Monitors
  • 5.25″ Kevlar Woofer and 1″ Tweeter
  • 70W Class AB Bi-Amplification
  • Acoustic Tuning Controls
  • Acoustic Space Settings
  • XLR, 1/4″ TRS and RCA Inputs

$200.00 $299.00

Those on the lookout for a pair of studio monitors should look at the PreSonus Eris E5 Two-Way Active 5.25 Studio Monitor Pair Kit. These monitors each feature a 5.25″ Kevlar woofer and a 1″ tweeter. Their class-AB amplifiers provide a combined output of up to 140W, while each monitor can handle up to 102 dB SPL.

The Eris E5s provide a number of input options including XLR, TRS, and RCA, allowing them to be integrated into a variety of systems. Each monitor features three EQ controls, allowing you to tune them to your environment for optimal performance. In addition, the three-position Acoustic Space switch allows you to compensate for the bass boost that often occurs if you place your monitors near a wall or corner.

Acoustic Tuning Controls

The Eris provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors to your space. The Low control also is useful when using the E5 with a subwoofer.

The High control is a shelving filter that boosts or cuts all frequencies above 4.5 kHz by as much as 6 dB. The Mid control is a mid-frequency peak filter that boosts or cuts frequencies centered at 1 kHz and extending about one octave above and below that frequency. The Low Cutoff control rolls off frequencies below either 80 or 100 Hz at a slope of 12 dB/octave. This control is especially useful if you also have a connected subwoofer.

Acoustic Space Control

A three-position Acoustic Space switch controls a second-order, low shelving filter that cuts frequencies below 800 Hz by either 2 or 4 dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.

Thorough Protection Circuitry

RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. Soft-startup amplifiers prevent damaging pops from sounding through the speakers when you power them up.

Supplied Software

Studio One Prime DAW software and Studio Magic plug-in suite are included
  • Power Cable
  • Studio One Prime DAW Software
  • Studio Magic Plug-In Suite
  • 1-Year Warranty
Categories: ,
Inputs 1 x XLR balanced
1 x 1/4″ TRS balanced
1 x RCA phono unbalanced
Frequency Response 53 Hz to 22 kHz
Crossover Frequency 3 kHz
LF Amplifier 45W
HF Amplifier 35W
Maximum SPL 102 dB @ 1 meter
Low Frequency Driver 5.25″ (13.34 cm) Kevlar
High Frequency Driver 1″ (2.54 cm) silk dome
Input Impedance 10kΩ
Volume Control A-type taper
Equalization HF Control: -6, 0, +6 dB; continuously variable
MF Control: -6, 0, +6 dB; continuously variable
Low Cut Filter: Flat, 80 Hz, 100 Hz; switchable
Acoustic Space Control: Flat, -2 dB, -4 dB; switchable
Protection RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
Enclosure Material Vinyl-laminated MDF
Power Requirements 100 to 120V or 220 to 240V, 50/60 Hz
Dimensions 7 x 7.68 x 10.24″ (178 x 195 x 260 mm)
Weight 10.2 lb (4.63 kg)
Packaging Info
Package Weight 11.8 lb
Box Dimensions (LxWxH) 13.1 x 11.6 x 9.9″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PreSonus Eris E5 Two-Way Active 5.25 Studio Monitor Pair Kit”

There are no reviews yet.

Translate »