-40%
,

Yamaha HS5 Powered Studio Monitors with Cables and Isolation Pads Kit


  • For Mixing and Music Production
  • Two HS5 5″ 70W Powered Monitors
  • Two Auray IP-M Monitor Isolation Pads
  • Two 1/4″ TRS to XLR Cables
  • Nearfield Reference Monitors
  • Isolation Pads Improve Sound Clarity
  • Low-Resonance Enclosure Design

$300.00 $499.00

Designed for recording and mixing in your home studio, the Yamaha HS5 Powered Studio Monitors with Cables and Isolation Pads Kit includes a pair of HS5 5″ 70W powered speakers, a pair of Auray IP-M isolation pads, and two 1/4″ TRS to XLR cables to connect the components.

The HS5 speakers are engineered to give you an honest and precise audio reference with a concise sound image and flat frequency response, to ensure that your mix faithfully translates in most listening environments.

The IP-M isolation pads improve the accuracy and clarity of your monitoring system by preventing unwanted vibrations between your speakers and their resting surface. The pads can be adjusted to provide three listening angles.

Yamaha HS5 Powered Studio Monitor (Single, Black)

The black HS5 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 70W of total output and features a 5-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS5 has both an XLR and 1/4″ TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups.

Low Resonance Enclosure Design

HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

Noise Reduction Technology

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha’s engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

Controls and Connectivity

HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed next to walls, while HIGH TRIM allows for more flexible control of high frequency response. For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

Pearstone PM Series 1/4″ TRS Male to XLR Male Professional Interconnect Cable (6′)

The Pearstone PM Series 1/4″ TRS Male to XLR Male Professional Interconnect Cable (6′) is ideal for audio applications in which a device with an XLR input needs to be connected to a device with a balanced 1/4″ output. Typical scenarios include connecting the output of a mixing board or audio interface to a powered speaker, or using an aux send to route signal to an outboard effects processor.

The cable is equipped with 24-gauge oxygen-free copper conductors and spiral shielding to protect against EMI and RFI noise. The professional-grade cast-zinc Rean XLR connector is field serviceable and features silver-plated contacts, while the Rean 1/4″ TRS connector features a molded design for maximum strain relief. The twin conductive PVC shield reduces electrostatic noise, and distinguishes the PM series as the best value in its class.

Professional quality, field-serviceable, cast-zinc Rean connectors with silver-plated contacts
Twin conductive PVC shield reduces electrostatic noise
24-gauge oxygen-free copper conductors
Spiral shielding to protect against EMI and RFI noise

Auray IP-S Isolation Pad for Studio Monitor (Small, Single)

The small IP-S Isolation Pad from Auray is a monitor speaker isolation pad made from high-density acoustic foam. It is designed to decouple your monitor speakers from its resting surface by absorbing the monitor’s vibrations. This stops reverberation through the desk or speaker stands, therefore preventing unwanted resonance. Removing these unwelcome vibrations results in greater depth of field, tighter low end and transient response, and a higher level of detail across the frequency spectrum.

Set at Three Different Angles

Up position: Angle your speakers up for desktop use
Down position: Angle your speakers down for use on a monitor bridge or shelf
Flat position: Flip the pads upside down to set your speakers flat on adjustable speaker stands
  • Power Cable
  • 1-Year Warranty
  • Pearstone PM Series 1/4″ TRS Male to XLR Male Professional Interconnect Cable (6′)
  • 1-Year Warranty
  • Auray IP-S Isolation Pad for Studio Monitor (Small, Single)
  • One-Year Warranty
Categories: ,
Studio Monitor
Monitor Type Active 2-Way
Enclosure Bass-Reflex
Power Rating 70 W
Impedance 4 Ohms
Drivers LF Driver: 1 x 5″ / 12.7 cm Cone
HF Driver: 1 x 1″ / 2.54 cm Dome
Amplification 1 x LF Amplifier: Class-D Rated at 45 W
1 x HF Amplifier: Class-D Rated at 25 W
Performance
Frequency Range 74 Hz to 24 kHz (at -3 dB)
54 Hz to 30 kHz (at -10 dB)
Analog Input Sensitivity/Gain -10 dBu
Phase Adjustment None
Signal Processing
EQ 1 x LF Shelf: -4 to 0 dB at 500 Hz (2 dB Increments)
1 x HF Shelf: -2 to +2 dB at 2 kHz (2 dB Increments)
Filters None
Parametric EQ None
Crossover
Crossover Frequency 2 kHz
Connectivity
Audio I/O 1 x XLR Balanced Female Analog Input (10 Kilohms)
1 x 1/4″ TRS Balanced Female Analog Input (10 Kilohms)
Power
Power Consumption 45 W
General
Enclosure Material MDF
Mounting Points None
Dimensions (W x H x D) 6.7 x 11.2 x 8.7″ / 17 x 28.5 x 22.2 cm
Weight 11.7 lb / 5.3 kg
Packaging Info
Package Weight 16.2 lb
Box Dimensions (LxWxH) 16.4 x 12 x 10.2″

Pearstone PM Series 1/4″ TRS Male to XLR Male Professional Interconnect Cable (6′) Specs

Connector 1 1 x 3-Pin XLR
Connector 2 1 x 1/4″ TRS
Contact Plating Silver
Cable Length 25′ / 7.62 m
Shielding Copper
Packaging Info
Package Weight 0.335 lb
Box Dimensions (LxWxH) 8.5 x 6.3 x 1.1″

Auray IP-S Isolation Pad for Studio Monitor (Small, Single) Specs

Surface Area 7.5 x 9.25″ (19 x 23.5 cm)
Dimensions 7.5 x 11.25″ (19 x 28.6 cm)
Packaging Info
Package Weight 0.35 lb
Box Dimensions (LxWxH) 13 x 8.4 x 2.45″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Yamaha HS5 Powered Studio Monitors with Cables and Isolation Pads Kit”

There are no reviews yet.

You may also like…

Translate »